Clarion K10 Guida di Installazione Scaricare il pdf (Pagina 4)

H1/2 WHITE (-) Parking Light Output

This wire provides a (-) 200mA output to flash the parking lights. This is suitable for driving (-) light

control wires in Toyota, Lexus, BMW, some Mitsubishi, some Mazda, etc. If the vehicle has a positive

parking light circuit, a relay must be used to flash the parking lights.

H1/3 WHITE/BLUE (-) Channel 3 Output

This wire provides a (-) 200 mA output whenever the transmitter code controlling Channel 3 is received.

This output will continue as long as that transmission is received. Use for options such as a start system,

or power window controllers, etc.

H1/4 BLACK/WHITE (-) 200 mA Domelight Supervision Output

Connect this wire to the optional domelight supervision relay as shown in the following diagram:

IIMMPPOORRTTAANNTT!!

This output is only intended to drive a relay. It cannot be connected directly

to the domelight circuit, as the output cannot support the current draw of one or more bulbs.

IIMMPPOORRTTAANNTT!!

Never use this wire to drive anything but a relay or a low-current input! The

transistorized output can only provide 200 mA of current, and connecting directly to a sole-

noid, motor, or other high-current device will cause it to fail.

1 2 3 4 5 6 7 8 9 ... 15 16

Nessun commento

Clarion K10 Guida di Installazione Pagina 4